METAGLASS UV Printing Primer for Glass 200 ml
UV primer METAGLASS for printing on glass created to improve the adhesion of printing on glass. Its colorless formula does not leave stains or streaks on the glass, which significantly translates into the final aesthetics of prints. Additionally, it can be used with any UV printing plotters. In addition to improving print adhesion, it provides increased resistance to scratches and external factors such as sun, humidity and other factors that have a negative effect on UV printing.
Capacity: 1000 ml, application temperature: 17-25C, color: colorless
zł119.00
tax excl.
zł146.37 tax incl.
Quantity:
- Shipping in 24h
- Guaranteed shipping with next-day delivery!
- Take advantage of promotions and choose products with free delivery.
- Do you have any questions? We look forward to hearing from you +48 507 126 997
METAGLASS Primer 200 ml - Adhesion Promoter for UV Printing on Glass and Ceramics
METAGLASS Primer for UV printing on glass (200 ml) is a single-layer chemical adhesion promoter formulated to prepare smooth, non-porous substrates prior to UV-curable printing. Because glass and glazed ceramics lack surface porosity for mechanical ink anchoring, applying this primer establishes a durable bond between UV inks and the substrate.
Properties and Role in UV Printing
Formulated for decorating glass and ceramic items on flatbed UV and UV LED printers:
- Improved adhesion on glass and ceramics - modifies the top surface layer to reduce UV ink chipping, flaking, and abrasion during daily handling.
- Single-layer formula - thin active coating prepares substrates for printing after a short dwell time and final wipe-down.
- Pigment stability - supports long-term color fastness against light exposure and environmental wear.
Step-by-Step Application Instructions
Apply a moderate, uniform coat following standard shop procedures to avoid haze and achieve consistent ink bonding:
- Degrease the target print area using a suitable surface degreaser.
- Dry the substrate thoroughly with a clean lint-free cloth.
- Moisten a fresh lint-free cloth with a small amount of primer.
- Wipe the entire print zone evenly (applying too little or excessive primer reduces bonding performance).
- Wait 15 minutes to allow the primer to react with the glass surface.
- Dampen a clean lint-free cloth with surface cleaner and wipe the primed area thoroughly before starting the print job.
Storage and Safety Guidelines
Use the contents within 30 days of opening the bottle, as the formula loses effectiveness after this period. The liquid is flammable; handle with care in a well-ventilated workspace and keep away from open flames, sparks, and heat sources.
Technical Specifications
- Product type: Single-layer UV printing adhesion promoter
- Target substrates: Glass, mirrors, glazed ceramics
- Bottle volume: 200 ml
- Dwell time before cleaner wipe: 15 minutes
- Shelf life after opening: 30 days
- Safety classification: Flammable liquid
Have questions regarding glass preparation for UV printing or application supplies? Contact our team and we will gladly assist you.
Reference PR-CH-GLS-MET-200ML
| Compatibility | Glass, mirrors, ceramics |
|---|---|
| Product type | UV printing primer for glass |
| Capacity | 200 ml |
| Activation dwell time | 15 minutes |
| Shelf life after opening | 30 days |